Effectiveness of Metal Coating Using Electroplating, Electroless Plating and Hot Dipping in the Manufacture of Weapons
DOI:
https://doi.org/10.46799/ijssr.v3i6.399Keywords:
Metal Plating, Weapons, Electroplating, Chemical, Defense IndustryAbstract
The process of coating weapons is important in the manufacture of weapons, because it can improve the quality, durability and corrosion resistance of these weapons. Metal coatings on weapons can protect the surface of the weapon from damage due to friction, corrosion and other environmental effects. In addition, metal plating can also enhance the visual appearance of the weapon, giving the weapon an attractive and aesthetic appearance. Coatings can also increase the durability of weapons against various environmental conditions and extreme temperatures. The process of coating weapons must be done carefully and requires a complex process and requires proper handling. Therefore, the choice of the right coating method is very important in the manufacture of weapons, because it can affect the quality and durability of these weapons. There are several metal coating methods that can be used in the manufacture of weapons, including electroplating, electroless plating, and hot dipping. The method used is done by collecting and analyzing data from sources such as journals, notes, articles, reports, and other materials related to metal plating using electroplating, electroless plating and hot dipping. In this study, the results obtained that electroplating coating is a coating process that is suitable for the defense industry, because it has several characteristics that electroplating has in the process of coating weapons, due to the need for weapons from resistance due to wear and corrosion, this can be a recommendation to the parties. the defense industry in the process of coating the metal of these weapons uses the electroplating process today.
References
Apriliyanto, W. (2021). KINERJA ALAT ELEKTROPLATING UNTUK PRAKTIK DI SMK. Jurnal Dinamika Vokasional Teknik Mesin, 6(2), 105-111.
Barry, D. M. (2016). Corrosion and surface finishing. Corrosion Control and Surface Finishing: Environmentally Friendly Approaches, 57-65.
Basuki, S. (2022). Upaya Meningkatkan Motivasi Kerja Guru Melalui Supervisi Akademik. Journal Locus Penelitian dan Pengabdian, 1(7), 533-561. doi:10.58344/locus.v1i7.125
Beeley, P. R. (2023). Investment casting.
Cahyanti, Y. (2022). Studi Literatur: Pengaruh Suhu terhadap Ikan Nila (Oreochromis niloticus). Panthera: Jurnal Ilmiah Pendidikan Sains dan Terapan, 2(4), 224-235.
Chang, J.-K. (2022). Oxidation resistant silane coating for hot-dip galvanized hot stamping steel. Corrosion Science, 164, 108307.
Fahmi, M. H. (2021). STUDI LITERATUR PENGARUH KUAT ARUS, TEGANGAN, SUHU DAN WAKTU TERHADAP PELAPISAN LOGAM DENGAN METODE ELECTROPLATING. Electroplating, Coating Factors, Thickness.
Indarto, D. (2009). Pengaruh Waktu Tahan Proses Hot dipping Baja Karbon Rendah Terhadap Ketebalan Lapisan, Kekuatan Tarik Dan Harga Impak Dengan Bahan Pelapis Aluminum (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
Krisdiyanto, A. (2023). Analisis Pengaruh Aktifitas Pasar Bintoro Demak terhadap Kemacetan di Jalan Sultan Fatah. Jurnal Impresi Indonesia, 2(1), 91-100. doi:10.58344/jii.v2i1.2047
Kusumawati, E. (2022). SCHOOL COMMITTEE PARTICIPATION IN REALIZING THE QUALITY OF EDUCATION. 880-886.
Permana, P. A. (2021). Studi Literatur Faktor-Faktor Pengaruh Pada Pelapisan Nikel Dan Perkembangnya. DISTILAT: JURNAL TEKNOLOGI SEPARASI.
Purwanto, H. &. (2017). Pengaruh Waktu Pelapisan Elektro Nikel-Khrom Dekoratif terhadap Ketebalan, Kekerasan dan Kekasaran Lapisan. . Majalah Ilmiah Momentum.
Rohman Hakim, A. (2022). Islamic Religious Education Strategy in Instilling Character Moral Values in Adolescents. International Journal of Social health, 1(2), 80-86. doi:10.58860/ijsh.v1i2.12
Rosyidan, C. M. (2022). Proses Pelapisan Nikel Diatas Al Dengan Metode Elektroplating. Jurnal Teori dan Aplikasi Fisika.
Sirait, A. T. (2019). Penerapan produksi bersih untuk meningkatkan efisiensi proses pelapisan logam. Jurnal Pengelolaan Sumberdaya Alam Dan Lingkungan (Journal of Natural Resources and Environmental Management).
Suarsana, I. K. (2008). Pengaruh waktu pelapisan nikel pada tembaga dalam pelapisan khrom dekoratif terhadap tingkat kecerahan dan ketebalan lapisan. . Jurnal Ilmiah Teknik Mesin Cakram.
Sudana, I. M. (2017). Alat simulasi pelapisan logam dengan metode elektroplating. . Logic: Jurnal Rancang Bangun dan Teknologi.
Triyono, T. Y. (2022). Study Pengaruh Kecepatan Pengadukan pada Proses Stir Casting terhadap Sifat Fisik dan Mekanik AMC Berpenguat Pasir Silica yang Dilakukan Proses Electroless Coating. Mekanika: Majalah Ilmiah Mekanika.
Wei, X. (2014). Tin sensitization for electroless plating review. Journal of the Electrochemical Society, 161(5), D235.
Wiratama Putra, A. (2023). Implementation of Anesthesia Ethics to Improve Medical Professionalism. Indonesian Health Journal, 2(1), 78-82. doi:10.58344/indonesianhealthjournal.v2i1.25
Published
Issue
Section
License
Copyright (c) 2023 Andhika Kostrada
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
